Carbon Capture and Storage
The process control of a CO2 capture plant needs good and reliable detection of gas phase NH3, and CO2. Measuring NH3 is a challenge due to the corrosive environment and high concentrations of NH3. Several places in the process needs to be monitored and to transport the sample is difficult. A large dynamic range is needed as the NH3 concentration can vary between 15% volume and a few mg/m3. To use an extractive system in this environment will demand a lot of maintenance. The OPSIS DOAS system is different and provides CO2 capture plants with an accurate analyser that will operate with a minimum of maintenance. The OPSIS DOAS system is based on a non-contact method using an optical measurement path that can operate across the duct. The optical light is transported in an optical fibre to the analyser and one analyser can operate several paths. Besides the measurements of NH3, CO2 can be measured with the same analyser. Additionally, several other gases can be measured with the DOAS system.
All Opsis instruments are sold with 1 years parts warranty as STANDARD.
The warranty can, at additional cost, be extended for total peace of mind. Please call to discuss options for this.
Opsis instruments require periodic service and maintenance to both satisfy the requirements of the warranty and to ensure that the highest possible data capture rates are maintained.
Enviro Technology has a large team of in-house and field based service engineers who regularly receive “factory training” and can provide the very best levels of service and support.
Enviro Technology and Opsis recommend that the Opsis DOAS System for Carbon Capture and Storage is serviced every 6 months of continuous operation.
A wide range of servicing options are available and can include:
- Pre-scheduled on-site planned maintenance (every 6 months).
- Emergency on-site call-out within agreed timescales (i.e. 48 hours).
- Supply of consumable items (i.e. sample inlet filters).
- Supply of calibration gases and permeation tubes.
- Supply of permeation tube calibrators and zero air generators
- Remote analyser “health-checks” and diagnostics.
- Return-to-base servicing options.
- Local site operation services.
- Data collection and data management services.
Please contact either our sales or customer services teams to request a quotation for on going servicing and maintenance on this analyser.